Advertisment

MIT researchers create wearable sensor that turns your thumbnail into a touchscreen

author-image
DQINDIA Online
New Update
nailo

Researchers at the MIT Media Lab are developing a new wearable device that turns the user's thumbnail into a miniature wireless track pad. Called NailO, the innovation is a nail-mounted gestural input surface. Using capacitive sensing on printed electrodes, the interface can distinguish on-nail finger swipe gestures with high accuracy (> 92%). NailO works in real-time: the researchers miniaturized the system to fit on the fingernail, while wirelessly transmitting the sensor data to a mobile phone or PC.  NailO allows one handed and always-available input, while being unobtrusive and discrete. Inspired by commercial nail stickers, the device blends into the user’s body, is customizable, fashionable and even removable.

Advertisment

They envision that the technology could let users control wireless devices when their hands are full -- answering the phone while cooking, for instance. For example, if your hands are full while preparing a meal, you could potentially just use the thumbnail sensor to go up or down on your smartphone for looking up a recipe.  It could also augment other interfaces, allowing someone texting on a cellphone, say, to toggle between symbol sets without interrupting his or her typing. Finally, it could enable subtle communication in circumstances that require it, such as sending a quick text to a child while attending an important meeting.

Nailo2

The researchers describe a prototype of the device in a paper they're presenting at the Association for Computing Machinery's Computer-Human Interaction conference in Seoul, South Korea.

Advertisment

According to Cindy Hsin-Liu Kao, an MIT graduate student in media arts and sciences and lead author on the new paper, the device was inspired by the colorful stickers that some women apply to their nails. "It's a cosmetic product, popular in Asian countries," says Kao, who is Taiwanese. "When I came here, I was looking for them, but I couldn't find them, so I'd have my family mail them to me."

gestures2

The researchers envision that a commercial version of their device would have a detachable membrane on its surface, so that users could coordinate surface patterns with their outfits. To that end, they used capacitive sensing -- the same kind of sensing the iPhone's touch screen relies on -- to register touch, since it can tolerate a thin, nonactive layer between the user's finger and the underlying sensors.

Advertisment

As the site for a wearable input device, however, the thumbnail has other advantages: It's a hard surface with no nerve endings, so a device affixed to it wouldn't impair movement or cause discomfort. And it's easily accessed by the other fingers -- even when the user is holding something in his or her hand.

"It's very unobtrusive," Kao explains. "When I put this on, it becomes part of my body. I have the power to take it off, so it still gives you control over it. But it allows this very close connection to your body."

To build their prototype, the researchers needed to find a way to pack capacitive sensors, a battery, and three separate chips -- a microcontroller, a Bluetooth radio chip, and a capacitive-sensing chip -- into a space no larger than a thumbnail. "The hardest part was probably the antenna design," says Artem Dementyev, a graduate student in media arts and sciences and the paper's other lead author. "You have to put the antenna far enough away from the chips so that it doesn't interfere with them."

Advertisment

Kao and Dementyev are joined on the paper by their advisors, principal research scientist Chris Schmandt and Joe Paradiso, an associate professor of media arts and sciences. Dementyev and Paradiso concentrated on the circuit design, while Kao and Schmandt concentrated on the software that interprets the signal from the capacitive sensors, filters out the noise, and translates it into movements on screen.

For their initial prototype, the researchers built their sensors by printing copper electrodes on sheets of flexible polyester. That allowed them to experiment with a range of different electrode layouts, but in ongoing experiments, they're using off-the-shelf sheets of electrodes like those found in some track pads.

They've also been in discussion with battery manufacturers -- traveling to China to meet with several of them -- and have identified a technology that they think could yield a battery that fits in the space of a thumbnail but is only half a millimeter thick. A special-purpose chip that combines the functions of the microcontroller, radio, and capacitive sensor would further save space.

Advertisment

At such small scales, however, energy efficiency is at a premium, so the device would have to be deactivated when not actually in use. In the new paper, the researchers also report the results of a usability study that compared different techniques for turning it off and on. They found that requiring surface contact with the operator's finger for just two or three seconds was enough to guard against inadvertent activation and deactivation.

Related articles:

5 wearables that can transform senior care

ING Vysya Bank experiments with Wearables and Beacons to enhance customer satisfaction 

wearables mit wearable-devices nailo
Advertisment